Polystyrene Foam Blowing Promote Industrial Development

Polystyrene foam blowing agent is a polystyrene resin as the main blowing agent and other additives, which is currently the most frequently used as a buffer material. Of polystyrene foam production is concentrated in the Northeast, Jiangsu, Zhejiang and Beijing, Tianjin, Hebei, and in which small and medium enterprises as much.
styrofoam-material_150728
2007, 2008, 2010, 2011, 2012, five were molded polystyrene foam insulation with state checks, product qualification rate was 95.1% supervision, 96.3%, 97.5%, 97.5%, 97.8%. Product quality steadily, but there are still some problems. The main questions focused on the apparent density, oxygen index, combustion grading. The spot checks found Hongshan District of Wuhan City Xingda insulation material factory a batch apparent density project failed.
eps-foam-board_150728
When insufficient density polystyrene foam board, if used in building exterior insulation will result in lower tensile strength, thermal insulation systems can not meet the load of its own weight and finishes bearing shear strength requirements, easy to make EPS middle of the plate pulled off; and insufficient density will result in reduced EPS board insulation, moisture absorption increases, affect the insulation effect of the building, polystyrene foam board insulation will not achieve the role of building energy efficiency.
foam-stabilizer_150728
At present, the company is about 2000 EPS polystyrene foam production momentum is good, quality continues to improve. But a small number of large enterprises. It is reported that the apparent density refers to the mass per unit volume of foam at a predetermined temperature and relative humidity conditions. Apparent density to a certain extent affect the other physical properties, and directly reflect the cost of the product.
waste-styrofoam
Our insulation materials market started late, especially the market development of organic insulating material is lagging behind. Over the past decade, the state actively promote the development of energy-efficient buildings, reduce energy consumption, so that the expanded polystyrene board thin plaster exterior insulation technology has been widely used, increasing demand for polystyrene foam blowing agents, led to EPS manufacturer The rapid development.

This entry was posted in EPS Recycling MACHINE, Plastics Recycling Survey, Waste EPS Prodcuts and tagged , , , . Bookmark the permalink.

Leave a Reply