EPS foam compactor is common recycling equipment in the market at present. EPS foam compactor can be divided into foam cold press and foam hot melt machine. A foam cold press can compress many kinds of materials with different power levels. The basic principles and precautions of EPS foam compactor should be understood before purchasing the equipment.
How does an EPS foam compactor work?
As long as the operator put the foam block into the hopper, the machine’s crushing knife will automatically break the foam block according to the set power time, and then the screw arrangement will squeeze the small EPS foam into a square section of the tight block.
The EPS foam compactor uses cold pressure to form a foam block without special heating. There is a pressure dispatching device at the front of the compression section to schedule the compression ratio. Depending on the characteristics of the material itself, the compression ratio can be up to 40-50 times.
Whether an EPS foam compactor can perfectly press material needs the cooperation of users more often. When INTCO deals with customer problems, most of the problems are caused by improper operation, so we have always attached great importance to providing customers with systematic training methods.
1. Uniform feeding to prevent bridging
Feeding is the first point we should pay attention to when using EPS foam compactor, do not suddenly put a lot of materials, which will cause the generation of bridging phenomenon, which will affect the use of the machine and cause the machine to idle. Uniform feeding is the first step to correctly using EPS foam Compactor.
2. Check the electrical cabinet regularly
EPS foam compactor mechanism is not complicated, in which the electric cabinet is a key inspection object. There will be a lot of dust in our daily use environment, so it is necessary to regularly check the dust of the electric cabinet and whether the line is aging.
3. Change the lubricating oil regularly
There will be wear and tear in the process of mechanical use, and lubricating oil can greatly reduce the wear and aging phenomenon caused by use. INTCO reminds our customers that when using the EPS foam compactor, the lubricating oil of the motor reducer should be changed once every six months, which will greatly prolong the service life of the machine.
If you have any questions about EPS foam compactor or EPS foam recycling, you can get more related information by visiting INTCO recycling. What’s more, INTCO Recycling will always help you deal with any problems with EPS foam recycling.



